Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S
The ACEJ32X110-40S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. A 32 mm bore delivers 402.1 N push and 345.6 N pull at 0.5 MPa, rising to 563 N at 0.7 MPa, with a theoretical peak of 82 kgf at 1.0 MPa. The -40 code adds a 40 mm adjustment window: an external stop screw trims the 110 mm stroke down to 70 mm on site, so one cylinder covers a 70-110 mm range without re-ordering.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight jigs, guards and gantries. A hard-anodized aluminium body pairs with an S45C hard-chrome rod and a fixed TPU bumper at both ends. Because the -S magnet is fitted, CMSE or DMSE reed and solid-state switches mount directly in the body slots. As a rule of thumb, plan on roughly 241 N of usable work at 0.5 MPa, which lifts about 20 kg vertically with a 2:1 margin.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S Is Used
Fixture clamping on CNC pallets
The 70-110 mm adjustable window lets one cylinder serve several pallet sizes; 402.1 N push at 0.5 MPa clamps aluminium and plastic workpieces securely.
Packaging line pushers
A short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder slots beside narrow conveyor frames, while the fitted magnet feeds CMSE switch signals to the PLC.
Lab dosing and sample handling
Speed control from 30-500 mm/s and a trimmed extend stroke give repeatable short advances for sample trays; the TPU bumper softens each end stop at cycle rates up to 500 mm/s.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S the Right Cylinder?
Size against neighbours: a 25 mm bore gives 245.4 N push at 0.5 MPa, while a 40 mm bore reaches 628.3 N, so the 32 mm sits squarely in the mid-force band. If your load needs more than about 241 N of real work, step up; below 200 N, the 25 mm saves space and air. The 110 mm stroke is well inside the 200 mm maximum standard stroke for this bore. Note the stop screw is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so add a valve or external stop where position must hold. FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the ISO 21287 face; the female M8x1.25 rod thread suits standard rod attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S FAQ
At 0.5 MPa the 32 mm bore pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N; theoretical maximum is 82 kgf at 1.0 MPa. The ordered stroke is 110 mm with a 40 mm adjustment window, so the extend stroke can be trimmed anywhere from 70 to 110 mm via the external stop screw. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C. Port is 1/8" PT and the rod thread is female M8x1.25.
This is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated rod and threaded aluminium covers for easy service. A fixed TPU bumper at each end absorbs end-of-stroke energy but never locks or holds a load. Magnet slots run around the body, and because this model carries the optional -S magnet, CMSE or DMSE reed and solid-state switches can be clipped on for end-position signals. FA flange, LB foot, FTC brackets and I/Y rod knuckles mount straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.