Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50
The ACEJ32X110-50 is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 110 mm stroke that an external stop screw can trim anywhere in a 50 mm window, giving a usable extend range of 60-110 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical ceiling of 82 kgf at 1.0 MPa. In practice, plan on roughly 240 N (about 24 kgf) of real work at 0.5 MPa, which is enough to lift about 12 kg vertically with a 2:1 margin.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into shallow fixtures and guarded machines. A fixed TPU bumper at each end absorbs end-of-stroke shock, speed runs 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches - without that code no magnet is fitted. FA flange or LB foot brackets bolt straight to the ISO 21287 face.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50 Is Used
Fixture clamp with trimmable reach
On a machining fixture, the 60-110 mm extend range lets the setter dial in exact clamp position per part without shimming, backed by 402.1 N of push force at 0.5 MPa.
Packaging line pusher
A carton diverter on a food packaging conveyor uses the 110 mm stroke to move boxes between lanes, with the TPU bumper quieting every end-of-stroke stop at 30-500 mm/s.
Small-parts ejector
In a stamping die station, the compact short body fits where an ISO 15552 profile cylinder cannot, ejecting finished brackets with about 24 kgf of usable force at 0.5 MPa.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50 the Right Cylinder?
At this force class, step down to a 25 mm bore (245.4 N push at 0.5 MPa) for lighter clamping, or up to a 40 mm bore (628.3 N push) when the load grows. The 110 mm stroke sits well inside the 200 mm maximum standard stroke for bore 32, so it is a catalog item, not a made-to-order build. Choose the female M8x1.25 rod thread as coded here, or add B for male thread. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so it is not a load-holding lock. If position feedback is needed, order the -S magnet code so CMSE / DMSE switches can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50 FAQ
Bore 32 mm, stroke 110 mm adjustable within a 50 mm window (usable 60-110 mm). Push 402.1 N and pull 345.6 N at 0.5 MPa; push 563 N and pull 483.8 N at 0.7 MPa; theoretical maximum 82 kgf at 1.0 MPa. Operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, 1/8" ports, female M8x1.25 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot brackets mount directly on the standard face. Sensing requires the optional -S magnet code, which allows CMSE / DMSE switches on the body slots; this model as coded has no magnet fitted. The fixed TPU bumpers at both ends only soften the ends of travel - they never hold or brake a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.