Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S
The ACEJ32X110-50S is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 110 mm stroke that an external stop screw can trim anywhere in a 50 mm window, giving a usable extend range of 60-110 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical 82 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C.
Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight jig plates and guarding where a full-length body will not fit. As an -S model the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped onto the body for end-of-travel signals. For sizing, plan on roughly 240 N (about 24.6 kg) of real work at 0.5 MPa, which lifts roughly 12 kg vertically with a 2:1 margin. Fixed TPU bumpers at both ends absorb end-of-stroke energy; the stop screw sets position and is not a mid-stroke lock, so the rod still drifts if air is lost.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S Is Used
Jig clamp with trimmed stroke
On a machining fixture, the stop screw dials the 110 mm extend stroke down to 60 mm so the 402.1 N push clamps thin parts without over-travel, and the fitted magnet signals clamp-complete via a CMSE switch.
Packaging line push-off
At the end of a carton conveyor, the 60-110 mm adjustable range ejects boxes of varying widths, with the 345.6 N pull retracting the rod clear before the next cycle at up to 500 mm/s.
Lab press positioning
A small bench-top test press uses the 50 mm window to set an exact pressing depth per recipe, relying on the 563 N push at 0.7 MPa and DMSE switches for repeatable top and bottom positions.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S the Right Cylinder?
Compare force classes before committing: the 25 mm bore delivers 245.4 N push at 0.5 MPa, while the 40 mm bore reaches 628.3 N, so the 32 mm bore at 402.1 N sits in the middle for medium clamping and positioning duty. If the load must stay put on air loss, add an external locking solution - the -50 stop screw only sets the extend stroke end position. FA flange or LB foot mounts and I/Y rod knuckles bolt to the ISO 21287 face; the fitted -S magnet pairs with CMSE / DMSE switches. Rod end is female M8x1.25 and the port is 1/8" PT (G available).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S FAQ
This 32 mm bore model pushes 402.1 N and pulls 345.6 N at 0.5 MPa; at 0.7 MPa it reaches 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. The ordered stroke is 110 mm and the -50 stop screw trims the extend stroke by up to 50 mm, so the usable range is 60-110 mm. Speed is 30-500 mm/s and operating pressure is 0.15-1.0 MPa (22-145 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it easy to fit inside guards and tight fixtures. This -S version carries the optional magnet, so CMSE / DMSE reed or solid-state switches mount directly on the body slots. Fixed TPU bumpers at both ends absorb end-of-stroke impact, FA flange and LB foot mounts plus I/Y rod knuckles bolt to the standard face, and the rod end is female M8x1.25 with a 1/8" PT port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.