Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75
The ACEJ32X110-75 is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 110 mm stroke that an external stop screw can trim by up to 75 mm, giving a usable extend range of 35-110 mm on site. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N, with a theoretical ceiling of 82 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit. In practice, plan on roughly 241 N (about 24 kgf) of real work at 0.5 MPa, and expect it to lift about 20 kg vertically once a 2:1 margin is applied. The hard-anodized aluminium body carries an S45C hard-chrome plated rod, fixed TPU bumpers absorb end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches; this unit has no magnet fitted.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75 Is Used
Fixture clamp with trimmable stroke
On a machining fixture the 75 mm window lets the setter dial the clamp point anywhere from 35 to 110 mm of extend, so one cylinder serves several part heights at 402.1 N push.
Packaging pusher station
A short-body pusher on a carton transfer line: the compact ISO 21287 footprint fits under low guarding, and 345.6 N of pull retracts the pusher pad clear of the product stream.
Small part press-fit assist
Pressing bushings into housings on an assembly bench, where the roughly 24 kgf usable force at 0.5 MPa is enough for light interference fits and the stop screw sets the exact bottom position.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75 the Right Cylinder?
At 402.1 N push (0.5 MPa) this 32 mm bore suits clamping and positioning loads in the 20-25 kgf class. Step down to the 25 mm bore (245.4 N push) for lighter fixtures, or up to the 40 mm bore (628.3 N push) when the load grows. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve if the load must stay put. FA flange and LB foot mountings bolt to the ISO 21287 face, and the female M8x1.25 rod thread takes standard knuckles. If position feedback is needed later, order the -S version, since this model has no magnet and accepts no sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75 FAQ
This 32 mm bore model pushes 402.1 N and pulls 345.6 N at 0.5 MPa; at 0.7 MPa push is 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/8" PT port and a female M8x1.25 rod thread.
An external stop screw shortens the 110 mm extend stroke by up to 75 mm, so the working range is 35-110 mm; it is a mechanical end stop, not a load lock, so the rod still drifts if air is lost. Fixed TPU bumpers absorb end-of-stroke shock at both ends. Sensors need the optional -S magnet code with CMSE / DMSE switches; this model has no magnet, so no switch can be mounted. FA flange and LB foot mountings fit the ISO 21287 face, and the body is about 50% shorter in mounting length than an ISO 15552 profile cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.