Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B
The ACEJ32X110-75B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 32 mm bore delivers 402.1 N push and 345.6 N pull at 0.5 MPa, rising to 563 N push at 0.7 MPa, with a theoretical peak of 82 kgf at 1.0 MPa. The -75 code means an external stop screw lets you trim the 110 mm extend stroke anywhere in a 75 mm window, giving a usable range of 35-110 mm without swapping the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. In practice, plan on roughly 241 N (about 24 kgf) of usable push at 0.5 MPa, which lifts about 20 kg vertically with a 2:1 margin. This B-coded unit has a male M8x1.25 rod thread and a 1/8" PT port.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B Is Used
Fixture clamping with variable part sizes
Trim the extend stroke between 35 and 110 mm so one 402.1 N cylinder clamps both short and tall workpieces on a CNC fixture without repositioning.
Pick-and-place of aluminium housings
With about 20 kg of vertical lift capacity at a 2:1 margin, it handles cast housing transfer on electronics assembly lines at up to 500 mm/s.
Carton push-off on packaging machines
The 110 mm stroke and compact short body fit behind forming collars where a full-length ISO 15552 profile cylinder would not reach.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B the Right Cylinder?
Size by force: a 25 mm bore gives 245.4 N push at 0.5 MPa for lighter clamping, while a 40 mm bore raises it to 628.3 N for heavier tooling. The 32 mm bore at 402.1 N push sits in the middle and suits medium jigs and pick units. Remember the stop screw is a mechanical end stop only - on air loss the piston still drifts, so do not rely on it to hold a load mid-stroke. Bolt on FA flange or LB foot mounts, and if you need position sensing, order the -S variant, since this model has no magnet and no CMSE / DMSE switch can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the port is 1/8" PT with an M8x1.25 male rod thread.
An external stop screw shortens the 110 mm extend stroke by up to 75 mm, so you can set any extend length from 35 to 110 mm on site; it cannot lengthen the stroke past 110 mm. The TPU bumpers at both ends absorb end-of-stroke energy. For position detection you need the optional -S magnet version, which accepts CMSE / DMSE switches - this model carries no magnet, so no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.