Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB
A double acting ISO 21287 compact cylinder, the ACEJ32X110-75SB pairs a 32 mm bore with a 110 mm stroke and a 75 mm adjustment window: an external stop screw trims the extend stroke on site anywhere between 35 and 110 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, rising to 563 N at 0.7 MPa, with a theoretical peak of 82 kgf at 1.0 MPa. The male rod thread (B code) suits external rod accessories, and the 1/8" port is set by the bore.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping fixtures and machine frames. Because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches can be fitted for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke impact, and as a rule of thumb plan for roughly 240 N (about 24 kg) of real work at 0.5 MPa rather than the full rating.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB Is Used
CNC fixture clamping
The 35-110 mm trim range lets one cylinder serve multiple fixture heights on a machining centre table, with 402.1 N of clamp force at 0.5 MPa holding aluminium parts steady.
Carton reject pusher
On a packaging line conveyor, the 110 mm stroke ejects misaligned cartons while the compact body fits under guarding where a full-length profile cylinder would not.
Bottle lane diverter
A bottling plant uses the adjustable stroke to gate bottles between lanes at 30-500 mm/s, with CMSE switches (enabled by the -S magnet) confirming divert position.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB the Right Cylinder?
At 402.1 N push at 0.5 MPa this bore sits between the 25 mm (245.4 N) and 40 mm (628.3 N) sizes - step down for lighter clamps, up when the load approaches 60 kgf. The 110 mm stroke is well inside the 200 mm maximum standard stroke for bore 32, so no made-to-order stroke is needed. Remember the stop screw only shortens the extend stroke; it is not a mid-stroke lock, so on air loss the piston still drifts. Mount with FA flange or LB foot, and if position feedback matters, this -S version already accepts CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N; theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, with a 1/8" port and M8x1.25 female rod thread option (this B version has a male thread).
The -75 code is a 75 mm window: an external stop screw shortens the 110 mm extend stroke to any length down to 35 mm, set on site with a wrench. The stop is a mechanical end stop only - it does not hold a load if air is lost. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount in the body slots for position feedback. FA flange and LB foot mountings bolt to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.