Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB
A double acting ISO 21287 compact cylinder, the ACEJ63X50-50SB pairs a 63 mm bore with a 50 mm stroke that an external stop screw can trim anywhere in a 50 mm window, giving a usable extend range of 0-50 mm without changing hardware. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa. In practice, plan on roughly 935 N of real work at 0.5 MPa, and for vertical lifts that equates to raising about 79 kg with a 2:1 margin.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight welding jigs and press fixtures. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clipped on for end-of-stroke signalling, and a fixed TPU bumper at each end absorbs stop energy.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB Is Used
Welding fixture clamping
The 935 N usable push at 0.5 MPa seats steel brackets against locating pins, and the 0-50 mm trim lets one cylinder serve several fixture variants.
Pallet gate actuation
1558.6 N of push swings heavy conveyor gates on packaging lines, with CMSE switches confirming gate position when the -S magnet is used.
Small press fitting
Presses bearings into housings on a bench assembly cell, lifting about 79 kg vertically with margin, at speeds set between 30 and 500 mm/s.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB the Right Cylinder?
Size down to an ACEJ50X50-50 (981.7 N push at 0.5 MPa) if the load is lighter, or step up to an ACEJ80X50-50 (2513.3 N) when more thrust is needed. The adjuster is a mechanical end stop for the extend stroke only, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and the male rod thread (B code) suits rod knuckles such as the I or Y type.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi).
An external stop screw shortens the 50 mm extend stroke anywhere within the ordered 50 mm window, so the working range is 0-50 mm; it cannot extend past the ordered stroke. Because this model carries the -S magnet, CMSE / DMSE reed or solid-state switches mount in the body slots for position feedback. The fixed TPU bumpers at both ends only decelerate the piston near the ends of travel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X50-50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.