Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30
This is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw on the ACEJ63X55-30 trims the 55 mm stroke by up to 30 mm, giving a usable range of 25-55 mm without changing the cylinder. At 0.5 MPa the 63 mm bore delivers 1558.6 N push and 1458.1 N pull, rising to 2182.1 N push at 0.7 MPa, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames where a full-length cylinder will not fit.
In practice, plan on roughly 935 N of real work at 0.5 MPa (about 0.6 of the push rating), and expect it to lift about 79 kg vertically once a 2:1 margin is applied. The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod with a female M10x1.5 thread, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The magnet is not fitted on this version; order the optional -S code if you later need CMSE / DMSE switch sensing.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30 Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 55 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30 Is Used
Fixture clamping on CNC machining centers
The 1558.6 N push at 0.5 MPa clamps aluminum housings in dedicated jigs, and the 25-55 mm adjustable range lets one cylinder serve several fixture heights.
Bench-top press and staking stations
With about 935 N of usable work force at 0.5 MPa, the 63 mm bore handles light staking, riveting and press-fit tasks where a full-length profile cylinder will not fit under the press head.
Packaging line pusher gates
Running at 30-500 mm/s, the compact body diverts cartons on conveyor lines, and the stop screw trims the throw to match lane widths without swapping cylinders.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30 the Right Cylinder?
Compare force classes before committing: the bore 50 version pushes 981.7 N at 0.5 MPa, while stepping up to bore 80 gives 2513.3 N, so the 63 mm bore sits squarely in the mid-range for clamping and pressing jigs. If your fixture needs position feedback, remember the -S magnet must be ordered up front, since this model ships without one. FA flange and LB foot mounts plus I and Y rod knuckles bolt straight to the ISO 21287 face. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it is not a load-holding lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N (pull 2041.3 N), and the theoretical maximum is 317.9 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 55 mm extend stroke on site, so the usable range is 25-55 mm. It shortens the stroke only and never extends past the ordered stroke, and it is a mechanical end stop, not a mid-stroke lock.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, 16 mm hard-chrome rod, female M10x1.5 rod thread and 1/8" PT ports. A fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange and LB foot mounts plus I and Y rod knuckles bolt to the standard face. Sensing requires the optional -S magnet, which enables CMSE / DMSE switches; this model without -S carries no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.