Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB
Double acting and built to the ISO 21287 compact format, the ACEJ63X55-30SB pairs a 63 mm bore with a 55 mm stroke that an external stop screw trims anywhere in a 30 mm window, giving a usable extend range of 25-55 mm. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical ceiling of 317.9 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping fixtures and gantry frames. As a rough rule, keep real work to about 935 N (roughly 95 kg equivalent) of the push rating; halving the raw lift figure means this bore lifts about 79 kg vertically with a 2:1 margin. The fitted -S magnet accepts CMSE / DMSE switches, the B code gives a male rod thread, and fixed TPU bumpers absorb end-of-stroke energy at both ends.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 55 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB Is Used
Clamp fixtures on CNC machining centres
The 1558.6 N push at 0.5 MPa holds aluminium or mild-steel parts in milling fixtures, while the 25-55 mm trim range matches varied part heights without swapping cylinders.
Stopper gates on pallet conveyors
A 55 mm stroke (trimmable down to 25 mm) raises and lowers pallet stops at line speed, and the fitted -S magnet feeds CMSE switch signals to the PLC for gate-position confirmation.
Push-off ejectors on palletizing cells
With about 935 N of practical working force at 0.5 MPa, the cylinder slides cartons off transfer plates inside gantry frames too shallow for a full-length profile cylinder.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB the Right Cylinder?
At 63 mm bore you sit mid-range: a 50 mm bore pushes 981.7 N at 0.5 MPa for lighter clamps, while an 80 mm bore delivers 2513.3 N when the tooling needs more muscle. Remember the stop screw is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so it is not a load-holding lock. FA flange or LB foot mountings bolt to the ISO 21287 face, and this model already carries the -S magnet, so CMSE / DMSE switches can be fitted without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa, 2182.1 N push and 2041.3 N pull; theoretical maximum 317.9 kgf at 1.0 MPa. The ordered stroke is 55 mm and the -30 stop screw trims the extend stroke by up to 30 mm, so the usable range is 25-55 mm. Speed is 30-500 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi), and the bore 63 port size is 1/8" (PT).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends that only decelerate at the ends - they never lock or brake a load. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots; FA flange and LB foot mountings bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X55-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.