Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10
The ACEJ63X60-10 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 60 mm stroke by up to 10 mm on site, giving a usable range of 50-60 mm without changing hardware. At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa, so it carries mid-size clamping and pressing work in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Plan on roughly 935 N of real work at 0.5 MPa (about 60% of the push figure), which corresponds to lifting about 79 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod with a female M10x1.5 thread, fixed TPU bumpers absorb end-of-stroke energy at both ends, and the optional -S magnet enables CMSE / DMSE switches - this unit has no magnet fitted. Speed range is 30-500 mm/s.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10 Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10 Is Used
Fixture clamping on CNC machining centers
A 50-60 mm extend range with 1558.6 N push clamps aluminum die-cast housings in a 3-jaw machining fixture, and the short body fits inside the fixture base where a profile cylinder cannot.
Bench press for bearing seating
The 63 mm bore seats ball bearings into gearbox housings on a small assembly press, with the 10 mm adjustment window dialing the end position to match each housing variant.
Pusher on a packaging line conveyor
Stroke trimmed to 52 mm via the stop screw, the cylinder pushes cartons sideways between conveyor lanes at up to 500 mm/s, with FA flange mounting off the side rail.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10 the Right Cylinder?
Size down to the ACEJ50 (981.7 N push at 0.5 MPa) for lighter clamps, or up to the ACEJ80 (2513.3 N) when the load grows. Remember the stop screw only shortens the extend stroke - it is not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mountings bolt to the ISO 21287 face, and if position feedback is needed later, order the -S code so CMSE / DMSE switches can be used.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 60 mm extend stroke by up to 10 mm, so the working range is 50-60 mm. It cannot lengthen the stroke past 60 mm, and the stop is a mechanical end stop only - it does not hold a load if air pressure is lost.
The ISO 21287 short-body design saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight jigs and guards. FA flange and LB foot mountings plus I and Y rod knuckles bolt to the standard face. Position sensing requires the optional -S magnet code - this model has no magnet, so no CMSE or DMSE switch can be mounted unless -S is ordered. Ports are 1/8" (PT), the rod thread is female M10x1.5, and fixed TPU bumpers sit at both ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.