Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B
The ACEJ63X60-10B is a double acting ISO 21287 compact cylinder with a 63 mm bore and a 60 mm stroke that an external stop screw trims on site by up to 10 mm, giving a usable extend range of 50-60 mm. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The B code gives a male rod thread on the 16 mm rod, and the port size for this bore is 1/8".
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped welding fixtures and machine frames where a full-length body will not reach. As a rule of thumb, plan for about 935 N of real work at 0.5 MPa, which corresponds to lifting roughly 79 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke impact, and the hard-anodized aluminium body carries an S45C hard-chrome rod for long seal life. This unit has no magnet; order the optional -S code if you later need CMSE or DMSE switch position sensing.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B Is Used
Press-fit bushing insertion
The 1558.6 N push at 0.5 MPa seats automotive bushings into control-arm housings, with the 50-60 mm trimmed stroke matching shallow press depths.
Weld fixture clamping
Clamps sheet-metal panels in automotive weld cells; the short body fits between fixture rails where an ISO 15552 profile cylinder is too long.
Pallet elevator push stations
Lifts about 79 kg vertically with a 2:1 margin, ideal for raising small pallets or trays at conveyor transfer points.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B the Right Cylinder?
Size against neighbours: the 50 mm bore delivers 981.7 N push at 0.5 MPa, while the 80 mm bore reaches 2513.3 N, so the 63 mm bore sits squarely in the mid-force band for clamping and pressing jigs. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock; on air loss the piston drifts, so add a separate holding valve for suspended loads.
FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 face. Operating window is 0.15-1.0 MPa (22-145 psi) with speeds of 30-500 mm/s. If position feedback matters, specify the -S variant so CMSE / DMSE switches can be clipped to the body.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 60 mm extend stroke to any value from 50 to 60 mm. It is a mechanical end stop only, not a mid-stroke lock.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt to the standard face. A fixed TPU bumper at both ends absorbs end-of-stroke impact. Position sensing requires the optional -S magnet order; this model has no magnet, so CMSE / DMSE switches cannot be used on it as supplied.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.