Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB
The ACEJ63X60-10SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 63 mm bore delivers 1558.6 N pushing and 1458.1 N pulling at 0.5 MPa, rising to 2182.1 N at 0.7 MPa. The -10 code gives a 10 mm trim window: an external stop screw shortens the 60 mm extend stroke on site, so the usable range is 50-60 mm without swapping the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which helps when a 60 mm stroke must fit behind a guard or inside a weld fixture. Because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be fitted for end-of-stroke sensing. As a rule of thumb, plan on roughly 935 N of usable work at 0.5 MPa, and halve the lift math: it raises about 79 kg vertically with a 2:1 margin.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB Is Used
Weld fixture clamping
The 1558.6 N push at 0.5 MPa clamps steel brackets in automotive weld jigs, and the 50-60 mm trim range lets technicians dial the clamp pad position to the part without shimming.
Pallet lift-and-lower stations
With about 79 kg of vertical lift at a 2:1 margin, the cylinder raises loaded pallet plates on packaging lines; the fixed TPU bumper softens each end of the short 60 mm travel.
Press assist on assembly benches
The 2182.1 N push at 0.7 MPa seats bearings and bushings into housings, while CMSE switches on the fitted -S magnet confirm full extension before the operator releases the part.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB the Right Cylinder?
At 63 mm bore this sits between the 50 mm (981.7 N push at 0.5 MPa) and the 80 mm (2513.3 N push at 0.5 MPa); pick 50 mm for lighter clamping, 80 mm when the load approaches 1000 kgf class. If the application needs a heavier 16 mm rod or a 250 mm standard stroke ceiling, bore 63 is the right class. Note that the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a valve or lock for load holding. FA flange or LB foot mountings and I/Y rod knuckles bolt to the ISO 21287 face; the male rod thread (B code) suits clevis-style tooling, and PT ports take standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: turn the external stop screw to shorten the 60 mm extend stroke anywhere in a 50-60 mm range. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and fixtures. This version carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots for position feedback (without -S there is no magnet). The male rod thread (B code) suits knuckle tooling, FA flange and LB foot mountings bolt to the standard face, and the 1/8" PT port takes common fittings. A fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.