Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B
The ACEJ63X60-20B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 63 mm bore delivers 1558.6 N push and 1458.1 N pull at 0.5 MPa, rising to 2182.1 N at 0.7 MPa, with a theoretical peak of 317.9 kgf at 1.0 MPa. The -20 code gives a 20 mm adjustment window: an external stop screw trims the 60 mm extend stroke down to 40 mm on site, so one cylinder covers a 40-60 mm range without reordering. The male rod thread (B code) bolts straight to tooling.
The hard-anodized aluminium body with an S45C hard-chrome plated 16 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight gantries and guarding. A fixed TPU bumper at each end absorbs end-of-stroke energy. Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, it lifts roughly 95 kg vertically at 0.5 MPa; halving that for a 2:1 margin means planning vertical lifts of about 48 kg.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B Is Used
Clamping welded fixtures
The 1558.6 N push at 0.5 MPa clamps steel brackets in automotive welding jigs, and the 40-60 mm adjustable window absorbs fixture tolerance without changing the cylinder.
Packaging line pushers
Mounting length about 50% shorter than an ISO 15552 profile cylinder lets this unit slot between conveyor frames to divert cartons at 30-500 mm/s.
Pallet gate actuation
With about 95 kg of thrust at 0.5 MPa, the male-threaded 16 mm rod swings heavy safety gates on warehouse palletizing cells; the fixed TPU bumper quiets each end stop.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B the Right Cylinder?
At 0.5 MPa this bore pushes 1558.6 N, so size real work at roughly 935 N (about 95 kg of thrust) to leave margin. A 50 mm bore offers 981.7 N push and a 80 mm bore 2513.3 N, so step up if your load exceeds the 63 mm margin. Note the stop screw is a mechanical end stop for the extend stroke only: on air loss the piston drifts, so it is not a mid-stroke lock. FA flange, LB foot and I/Y rod knuckles fit the ISO 21287 face. If you need position sensing, order the -S variant, which carries the optional magnet for CMSE / DMSE switches; this model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 60 mm extend stroke to any setting from 40 to 60 mm. It is double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends and a 1/8" PT port.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C hard-chrome plated 16 mm rod, threaded aluminium covers and a fixed TPU bumper at each end, with a male rod thread from the B code. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. Sensors are possible only on the -S variant, where the optional magnet works with CMSE / DMSE switches; this model has no magnet, so no switch can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.