Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S
The ACEJ63X60-20S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 60 mm stroke by up to 20 mm, giving a usable range of 40-60 mm without changing hardware. At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N, so a practical working figure is roughly 935 N of real force once you plan at about 60% of the rating. The magnet is the -S option and this model carries it, so CMSE or DMSE reed and solid-state switches can be mounted in the body slots.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight jigs, guarding and gantry frames. A hard-anodized aluminium body runs against an S45C hard-chrome-plated 16 mm rod, fixed TPU bumpers absorb end-of-stroke energy at both ends, and the female M10x1.5 rod thread plus FA flange or LB foot mounts bolt straight onto standard fixtures. Speed range is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S Is Used
Press-fit of bearing sleeves
The 1558.6 N push at 0.5 MPa suits seating bearings into housings on small assembly presses, with the 40-60 mm adjustable window matching varying part heights.
Lift-and-lower of fixture plates
Lifts about 79 kg vertically with a 2:1 margin, ideal for raising welding fixture plates between stations in a fabrication cell.
Monitored clamping on a CNC fixture
With the -S magnet fitted, CMSE or DMSE switches confirm full clamp on jigs mounted via the FA flange or LB foot face.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S the Right Cylinder?
Size check: a 50 mm bore gives 981.7 N push at 0.5 MPa, while an 80 mm bore reaches 2513.3 N, so this 63 mm unit at 1558.6 N sits squarely in the mid-heavy class. Vertically it lifts about 79 kg with a 2:1 margin (158.9 kgf theoretical halved), enough for palletized cartons or small die sections. Remember the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it is not a load-holding lock. If you need position feedback, this -S model already carries the magnet for CMSE / DMSE switches; if you need a longer travel, the bore accepts up to a 250 mm standard stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 60 mm extend stroke on site, giving a 40-60 mm usable range. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guarding and gantries. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt to the standard face, and the female rod thread is M10x1.5 with a 1/8" port. This -S model carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be fitted; a fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.