Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30
A double acting ISO 21287 compact cylinder, the ACEJ63X60-30 pairs a 63 mm bore with a 60 mm stroke that an external stop screw trims by up to 30 mm on site, giving a usable extend range of 30-60 mm. At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N, rising to 2182.1 N at 0.7 MPa. The hard-anodized aluminium body with an S45C hard-chrome plated 16 mm rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight weld fixtures and palletizer frames. In practice, plan on roughly 935 N (about 95 kg) of real work at 0.5 MPa, which lifts about 79 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, and FA flange or LB foot mounts bolt straight to the ISO 21287 face.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30 Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30 Is Used
Weld fixture clamping
The 1558.6 N push at 0.5 MPa clamps steel brackets in automotive weld jigs, and the 30-60 mm adjustable range lets one cylinder serve several fixture variants without re-plumbing.
Palletizer push-off
With about 935 N of practical working force, the short body ejects cartons from a palletizer conveyor lane where an ISO 15552 profile cylinder would be too long to fit.
Small press staging
The 2182.1 N push at 0.7 MPa seats bearings or bushings in a light assembly press, with the stop screw set so every stroke bottoms at the same depth.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30 the Right Cylinder?
At 1558.6 N push at 0.5 MPa this 63 mm bore sits between the 50 mm bore (981.7 N) and the 80 mm bore (2513.3 N), so pick 63 mm when a 50 mm unit is under-rated but 80 mm is oversized. The -30 window means the 60 mm stroke can be shortened to as little as 30 mm by the stop screw; it is a mechanical end stop only, so on air loss the piston drifts and the adjuster never holds a load. Order the -S code if you need the optional magnet for CMSE / DMSE switches; this version has no magnet fitted. Female M10x1.5 rod thread, 1/8" PT ports, FA flange or LB foot mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 60 mm extend stroke by up to 30 mm, so the usable range is 30-60 mm. It is double acting, runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi), and uses 1/8" PT ports with a female M10x1.5 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight gantries. A fixed TPU bumper at each end absorbs end-of-stroke impact. FA flange and LB foot mounts bolt to the standard ISO 21287 face. Position sensing requires the optional -S magnet ordered with the cylinder; without it no magnet is fitted, and then CMSE or DMSE switches can be clipped onto the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.