Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B
The ACEJ63X60-30B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 63 mm bore delivers 1558.6 N push and 1458.1 N pull at 0.5 MPa, rising to 2182.1 N push at 0.7 MPa, with a theoretical peak of 317.9 kgf at 1.0 MPa. The B code gives a male rod thread on the 16 mm rod, and the 1/8" port serves this bore size. An external stop screw trims the 60 mm extend stroke anywhere within the ordered 30 mm window, so the usable range is 30-60 mm, set on site with a screwdriver rather than a new order.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in dense machine frames and guarded cells. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the adjuster is a mechanical end stop only - on air loss the piston can still drift, so it never holds a load. Running 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, this bore lifts roughly 159 kg vertically at 0.5 MPa, or plan on about 935 N (near 95 kg) of real work for margin.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B Is Used
Press-fit clamping of gearbox housings
The 1558.6 N push at 0.5 MPa seats aluminium housings into locating fixtures, and the 30-60 mm adjustable window lets one cylinder serve several housing heights without re-plumbing.
Pallet stop and eject on CNC lines
Trimming the extend stroke to exactly 45 mm within the 30 mm window positions pallet stops precisely, while the compact body fits the tight space under a conveyor frame where an ISO 15552 profile cylinder would not.
Battery-pack lid hold-down in test rigs
About 79 kg of vertical lift capability at a 2:1 margin holds EV module lids during leak testing; the male rod thread (B code) bolts straight to custom hold-down arms.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B the Right Cylinder?
Size against the load: the next bore down, ACEJ 50, gives 981.7 N push at 0.5 MPa, while the 80 mm bore reaches 2513.3 N - pick the 63 mm when your clamping or pressing duty sits between those figures. At 0.5 MPa the 1558.6 N push supports about 935 N of continuous work once you keep a 40% margin, and roughly 79 kg vertical lift at a 2:1 safety factor. Mount it on the ISO 21287 face with FA flange or LB foot brackets plus I/Y rod knuckles; the optional -S magnet code adds CMSE / DMSE switch capability, but this unit (no S code) carries no magnet, so position sensing is not possible on it as ordered.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 60 mm extend stroke to any value from 30 to 60 mm. It is a mechanical end stop for the extend stroke only - it does not lock the piston on air loss. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs and guarded gantries. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the standard face. Sensing requires the optional -S magnet code, which enables CMSE / DMSE reed or solid-state switches; this model was ordered without -S, so it has no magnet and no switch can be mounted. Rod end is male thread (B code), port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.