Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S
The ACEJ63X60-30S is a double acting ISO 21287 compact cylinder with a 63 mm bore and a 60 mm stroke that an external stop screw can trim anywhere in a 30 mm window, giving a usable extend range of 30-60 mm on site. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical ceiling of 317.9 kgf at 1.0 MPa. In practice plan on roughly 935 N of real work at 0.5 MPa, and for vertical duty the rod lifts about 79 kg with a 2:1 margin.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight presses and fixtures. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped straight onto the body, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi), filtered to 40 um, with speed from 30-500 mm/s.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S Is Used
Bench press and crimping fixtures
About 935 N of dependable work at 0.5 MPa suits crimping terminals, staking inserts or light swaging on electronics and small assembly benches, with the 30-60 mm trim matching short part heights.
Fixture clamping on CNC pallets
The short ISO 21287 body tucks under fixture plates where an ISO 15552 profile cylinder would foul the toolchanger envelope, and the stop screw lets one clamp serve several part variants.
Position-verified ejection on packaging lines
With the fitted -S magnet driving CMSE / DMSE switches, the 60 mm stroke confirms full extend before a carton is pushed off a conveyor, at line speeds within the 30-500 mm/s band.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S the Right Cylinder?
At this force class the 63 mm bore sits between the 50 mm (981.7 N push at 0.5 MPa) and the 80 mm (2513.3 N push at 0.5 MPa); pick 50 mm if your load is under about 590 N and step to 80 mm above roughly 1500 N. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod will still drift if air is lost. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and the fitted -S magnet lets CMSE / DMSE switches report end positions. The female M10x1.5 rod thread and 1/8" PT ports suit standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S FAQ
Push is 1558.6 N and pull 1458.1 N at 0.5 MPa; at 0.7 MPa push reaches 2182.1 N and pull 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 60 mm extend stroke by up to 30 mm, so the usable range is 30-60 mm. It is a mechanical end stop only, not a load-holding brake, and the piston still drifts if air is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits shallow jigs and guarded gantries. Position sensing is available because this model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face, and the fixed TPU bumpers at both ends absorb end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.