Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB
The ACEJ63X60-30SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 60 mm stroke by up to 30 mm, giving a usable range of 30-60 mm without changing the cylinder. At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa. In practice, plan on roughly 935 N of real work at 0.5 MPa, which is about 95 kg of vertical lift with a sensible margin.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping fixtures and gantries. The hard-anodized aluminium body carries an S45C hard-chrome plated 16 mm rod, a male thread on the rod end (B code), and a fixed TPU bumper at each end. The -S magnet is fitted on this model, so CMSE / DMSE switches can be mounted for end-of-stroke sensing. Speed range is 30-500 mm/s.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB Is Used
Press-fit bushing insertion
The 1558.6 N push at 0.5 MPa seats automotive bushings in aluminium housings, with the stop screw trimming the stroke to match each fixture depth.
Indexing clamp on a CNC fixture
A 30-60 mm adjustable clamp stroke holds machined castings on a milling table; the fitted magnet drives a CMSE switch to confirm clamping before the cycle starts.
Palletized carton hold-down
In a packaging line, the compact body fits under a low guardrail and presses cartons during strapping, lifting about 95 kg of effective vertical load at 0.5 MPa.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB the Right Cylinder?
Size check: if 1558.6 N push at 0.5 MPa is more than your jig needs, the ACEJ50 at 981.7 N may suffice; if you need more, step up to the ACEJ80 at 2513.3 N. Remember the stop screw only shortens the extend stroke - it is a mechanical end stop, not a mid-stroke lock, so the rod will drift if air is lost under load. FA flange or LB foot mountings bolt to the ISO 21287 face, and PT ports are standard (G on request).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -30 code means an external stop screw shortens the 60 mm extend stroke by up to 30 mm, so the working range is 30-60 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be fitted for position detection. FA flange and LB foot mountings attach directly; outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.