Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50
A double acting AirTAC compact cylinder built to ISO 21287, the ACEJ63X60-50 pairs a 63 mm bore with a 60 mm stroke that an external stop screw trims on site. The -50 code gives a 50 mm adjustment window, so the usable extend stroke can be set anywhere from 10 to 60 mm without changing hardware. At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N, rising to 2182.1 N at 0.7 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which helps when a press fixture or palletiser gate has no room for a full-length body. In practice, plan for roughly 935 N of real work at 0.5 MPa, which is about 95 kg of horizontal load; vertically that same force lifts around 158 kg, so with a 2:1 margin you can safely lift about 79 kg. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the hard-anodized aluminium body with an S45C hard-chrome 16 mm rod stands up to continuous cycling at 30-500 mm/s.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50 Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50 Is Used
Benchtop press fixture
The 1558.6 N push at 0.5 MPa clinches terminals or stakes inserts in electronics assembly, and the stop screw lets you set the exact press depth between 10 and 60 mm per part.
Packaging line gate
A 60 mm stroke with a 50 mm trim window suits diverting or stopping cartons on a conveyor, and the short body fits the tight space beside the belt frame.
Palletiser push-off arm
With about 935 N of usable work force at 0.5 MPa, the cylinder pushes stacked layers onto a transfer plate, and the LB foot mount anchors it to the machine base.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50 the Right Cylinder?
At this bore size the 63 mm unit delivers 1558.6 N push at 0.5 MPa. Step down to a 50 mm bore if 981.7 N is enough, or move up to an 80 mm bore for 2513.3 N. Remember the stop screw is a mechanical end stop only: on air loss the rod still drifts, so it is not a mid-stroke lock. FA flange or LB foot mounts bolt to the ISO 21287 face, and if you need position sensing, order the optional -S magnet so CMSE / DMSE switches can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa the figures are 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s on air filtered to 40 um.
The -50 code is a 50 mm adjustment window: an external stop screw shortens the 60 mm extend stroke to any setting from 10 to 60 mm. It is a mechanical end stop, not a load-holding brake. The short ISO 21287 body takes FA flange or LB foot mounts, and if you order the optional -S magnet, CMSE / DMSE switches can be mounted on the body slots; without -S no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X60-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.