Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B
The ACEJ63X75-40B is a double acting ISO 21287 compact cylinder with a 63 mm bore and a 75 mm stroke that can be trimmed on site. An external stop screw shortens the extend stroke by up to 40 mm, giving a usable range of 35-75 mm, so one cylinder serves several jig positions without re-plumbing. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into cramped palletizer frames and machine guards.
Because the bore 63 rod is 16 mm hard-chrome-plated S45C steel running in a hard-anodized aluminium body, the cylinder holds up in high-cycle packaging lines. Plan on roughly 935 N (about 95 kg) of real work at 0.5 MPa, which lifts about 79 kg vertically with a 2:1 margin - enough for a loaded tray of bottled drinks. The male (B) rod thread suits external rod attachments, and the fixed TPU bumper at both ends absorbs end-of-stroke shock at speeds of 30-500 mm/s.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B Is Used
Tray ejection on a bottling line
Pushes filled trays off a conveyor stop at 1558.6 N, with the 35-75 mm adjustable range matching different tray heights without changing cylinders.
Clamping fixture on a CNC fixture plate
The male rod thread takes a custom clamp arm, and the 40 mm trim window lets one cylinder serve both short and tall workpieces.
Pallet corner squaring gate
Squares pallet loads in tight guard space where the compact body's 50% shorter mounting length over an ISO 15552 profile cylinder is the deciding factor.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B the Right Cylinder?
Size the load against 1558.6 N push at 0.5 MPa; if your tooling needs less, the ACEJ50X75-40B class delivers 981.7 N at the same pressure, while the ACEJ80X75-40B reaches 2513.3 N for heavier presses. Note that the stop screw is a mechanical end stop only - it sets the extend position but does not lock the piston if air is lost. FA flange and LB foot mounts bolt to the ISO 21287 face, and the optional -S magnet (not fitted on this code) enables CMSE / DMSE switches; order the S variant if end-position sensing is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 75 mm extend stroke to any length down to 35 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/8" (PT).
The hard-anodized aluminium body is an ISO 21287 compact design that saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA flange and LB foot options. A fixed TPU bumper at each end decelerates the piston at the ends of travel only - it never holds or brakes a load. This code has no magnet, so no switch can be mounted; order the -S version to enable CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.