Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S
The ACEJ63X75-50S is a double acting ISO 21287 compact cylinder with a 63 mm bore and a 75 mm stroke that an external stop screw can trim by up to 50 mm, giving a usable extend range of 25-75 mm. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa. The hard-anodized aluminium body and S45C hard-chrome plated rod run on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with a speed range of 30-500 mm/s.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into clamping fixtures and gantries where a full-length cylinder cannot reach. Plan on roughly 935 N (about 95 kg) of real working push at 0.5 MPa, which lifts about 79 kg vertically even after halving for a 2:1 margin. Fixed TPU bumpers absorb end-of-stroke energy at both ends, and the fitted -S magnet lets CMSE or DMSE switches report position along the body's magnet slots.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S Is Used
Press-fit bushing insertion
The 1558.6 N push at 0.5 MPa seats automotive bushings in aluminium housings, with the 50 mm window letting one cylinder serve several housing depths.
Weld fixture clamping
Short-body clamping of brackets on a robotic weld line, where the compact footprint fits between fixture rails and CMSE switches confirm clamp closure.
Pallet gate actuation
Swinging or lifting gates on a warehouse palletizing conveyor, where the 25-75 mm adjustable extend range matches different gate stops.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S the Right Cylinder?
At this force class the 63 mm bore sits between the 50 mm bore (981.7 N push at 0.5 MPa) and the 80 mm bore (2513.3 N push at 0.5 MPa), so pick 63 mm when 50 mm is marginal but 80 mm is oversized. The stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock, so the rod will still drift if air is lost. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face; the female M10x1.5 rod thread and 1/8" PT ports suit standard tooling plates.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S FAQ
Bore is 63 mm with a 75 mm stroke adjustable down to 25 mm via the -50 window. Push is 1558.6 N and pull 1458.1 N at 0.5 MPa; at 0.7 MPa push is 2182.1 N and pull 2041.3 N. Theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, ports 1/8" PT, rod thread female M10x1.5.
An external stop screw shortens the extend stroke on site anywhere within the ordered 50 mm window; it cannot lengthen the stroke past 75 mm and it does not hold a load if air is lost. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be clipped into the body's magnet slots for end-of-stroke or mid-range detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X75-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.