Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S
The ACEJ63X80-40S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. A 63 mm bore delivers 1558.6 N push and 1458.1 N pull at 0.5 MPa, rising to 2182.1 N at 0.7 MPa, with a theoretical peak of 317.9 kgf at 1.0 MPa. The -40 code gives a 40 mm adjustment window: an external stop screw trims the 80 mm stroke down on site, so the usable extend range is 40-80 mm without changing the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight jigs and gantries. Because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches can be mounted directly in the body slots. As a rule of thumb, plan for roughly 935 N (about 95 kg) of real work at 0.5 MPa, and expect it to lift about 79 kg vertically with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with fixed TPU bumpers at both ends.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S Is Used
Weld fixture clamping
The 1558.6 N push at 0.5 MPa clamps steel brackets in automotive weld jigs, and the 40-80 mm adjustable range absorbs fixture changes without swapping cylinders.
Pallet press-down station
On carton palletizing lines the 63 mm bore presses stacked layers square, lifting about 79 kg vertically with a 2:1 margin, while CMSE switches confirm top of stroke.
Conveyor gate diverter
The short ISO 21287 body fits under guarding where a full-length profile cylinder will not, diverting packages between conveyor lanes at 30-500 mm/s.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S the Right Cylinder?
Size up or down by force: the 50 mm bore gives 981.7 N push at 0.5 MPa, while the 80 mm bore reaches 2513.3 N, so the 63 mm sits in the mid-heavy class. If the stroke may still change after commissioning, the 40 mm trim window covers it; if the load must stay put on air loss, add an external locking valve, since the stop screw is an end stop only and the piston will drift when pressure drops. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 80 mm extend stroke to any setting from 40 to 80 mm. It is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches mount in the body slots. FA flange and LB foot mountings plus I and Y rod knuckles bolt straight to the standard face; the rod end is female M10x1.5 and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X80-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.