Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S
The ACEJ63X90-10S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 90 mm stroke by up to 10 mm on site, giving a usable range of 80-90 mm without changing the cylinder. At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N, rising to 2182.1 N at 0.7 MPa - enough for clamping and pressing fixtures in the mid-heavy force class.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding. Plan for roughly 935 N (about 95 kg) of real work at 0.5 MPa, which lifts about 79 kg vertically - halve that for a 2:1 margin on vertical lifts. The -S magnet is fitted, so CMSE / DMSE switches can be added for end-of-stroke sensing.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S Is Used
Fixture clamping on CNC machining centres
1558.6 N push at 0.5 MPa clamps aluminium housings in dedicated jigs; the 80-90 mm adjustable range matches varying part heights without swapping cylinders.
Carton push-off on packaging lines
The short ISO 21287 body fits under low guarding beside the belt, and the fitted -S magnet with a DMSE switch confirms each push stroke is complete.
Bench press for small bearing insertion
About 95 kg of usable working force at 0.5 MPa presses bearings into housings; the stop screw sets a repeatable 80-90 mm extend stroke for consistent depth.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S the Right Cylinder?
Size both ways before committing: the 50 mm bore delivers 981.7 N push at 0.5 MPa, while the 80 mm bore reaches 2513.3 N - this 63 mm sits between them at 1558.6 N push and 1458.1 N pull. If your jig needs a shorter travel than 90 mm, the -10 window lets you dial the extend stroke down to 80 mm with the stop screw rather than ordering a new cylinder.
Note the stop screw is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so add a separate valve or lock if the load must be held. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 90 mm extend stroke to as little as 80 mm. It is an end stop only - it never holds a load on air loss. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper sits at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body and S45C hard-chrome rod. This model carries the optional -S magnet, so CMSE reed or DMSE solid-state switches mount directly in the body slots for end-of-stroke detection. FA flange, LB foot and rod knuckles bolt to the standard ISO 21287 face; the rod end is female M10x1.5 and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.