Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB
The AirTAC Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ63X90-10SB pairs a 63 mm bore with a 90 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa. The -10 code gives a 10 mm trim window: an external stop screw shortens the extend stroke on site, so the usable range is 80-90 mm.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight jigs and gantry frames. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet fitted to this model lets CMSE / DMSE switches report position. At 0.5 MPa, plan on roughly 935 N (about 95 kg) of real working force, which lifts around 79 kg vertically with a 2:1 margin.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB Technical Specifications
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB Is Used
Fixture clamping on CNC pallets
With 1558.6 N push at 0.5 MPa, the 63 mm bore clamps machined aluminium housings on machining-centre pallets, and the 10 mm trim window dials in the exact clamp position per fixture.
Press-fit of bearings into housings
About 935 N of practical working force at 0.5 MPa presses small bearings and bushings into pump housings on an assembly bench, with the 80-90 mm stroke range matching shallow press depths.
Gate diverting on packaging lines
The compact body, roughly half the mounting length of an ISO 15552 profile cylinder, slots into tight conveyor frames to push cartons between lanes, while the fitted -S magnet feeds CMSE switch signals to the PLC.
Is the Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB the Right Cylinder?
For this 63 mm bore, 1558.6 N push at 0.5 MPa suits clamping and pressing fixtures in the 90-150 kg class. Step down to a 50 mm bore (981.7 N) for lighter loads or up to an 80 mm bore (2513.3 N) when the part is heavier. The stop screw trims the extend stroke within the ordered 10 mm window only - it will not lengthen travel past 90 mm, and it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange and LB foot mountings bolt to the ISO 21287 face; PT ports and the male rod thread are already set by the SB code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa, 2182.1 N push and 2041.3 N pull; theoretical maximum is 317.9 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 90 mm extend stroke on site, giving a usable range of 80-90 mm. It shortens travel only - it never extends past 90 mm - and it is an end stop, not a load-holding brake, so the rod can drift on air loss. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short-body design saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder will not. The hard-anodized aluminium body carries an S45C hard-chrome-plated 16 mm rod, and the port is 1/8" PT. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped into the body slots for end-of-stroke signalling. FA flange and LB foot mountings, plus I and Y rod knuckles, bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X90-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.