Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S
The ACEJ100X150-30S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 150 mm stroke by up to 30 mm on site, giving a usable range of 120-150 mm. At 0.5 MPa the 100 mm bore pushes 3927 N and pulls 3769.9 N, so in practice plan for roughly 2356 N of real work at that pressure. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits heavy clamping inside tight press frames and weld fixtures.
This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be clipped into the body slots for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke energy, the hard-anodized aluminium body runs on an S45C hard-chrome plated 20 mm rod, and the female M12x1.75 rod thread plus 1/4" PT ports drop straight into standard ISO 21287 fixtures. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S Is Used
Press-frame clamping
The 3927 N push at 0.5 MPa clamps steel weldments in automotive fixture frames, and the 120-150 mm adjustable window lets one cylinder serve several part heights.
Pallet lift-and-lower stations
With a vertical lift equivalent of about 200 kg at half margin, it raises loaded pallet plates in packaging lines while the -S magnet signals top of stroke via a DMSE switch.
Gate and door actuation
Furnace or machine-guard gates in the 120-150 mm travel band are driven at 30-500 mm/s, with the short ISO 21287 body fitting where a full-length profile cylinder cannot.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S the Right Cylinder?
At this force class the 100 mm bore delivers 3927 N push at 0.5 MPa; if your load needs less, the 80 mm bore gives 2513.3 N push at the same pressure, and the 125 mm bore raises it to 6135.9 N. Halving the lift equivalent, this cylinder lifts about 200 kg vertically with margin, so match it against the heaviest part you raise. Remember the -30 stop screw is a mechanical end stop, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve if the load must stay put. FA flange, LB foot and I/Y rod knuckles bolt to the ISO 21287 face; the magnet is already fitted here via the -S code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N and pull to 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 150 mm extend stroke to any length from 120 to 150 mm. It is a double acting cylinder running on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, with a fixed TPU bumper at both ends and a speed range of 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits dense machine layouts. This model includes the -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots (without -S there is no magnet). FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the standard face, and the female M12x1.75 rod thread with 1/4" PT ports suits common fittings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.