Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ100X150-40 pairs a 100 mm bore with a 150 mm stroke that an external stop screw trims by up to 40 mm, giving a usable range of 110-150 mm on site. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body and S45C hard-chrome plated rod run on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore fits heavy clamping stations and press fixtures where a full-length profile cylinder will not. Plan on roughly 2356 N (about 240 kg of force) for real work at 0.5 MPa, or expect it to lift about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches when position feedback is needed.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40 Is Used
Hydraulic press pre-clamping
The 3927 N push at 0.5 MPa seats workpieces in a stamping die before the main press cycle, with the 40 mm window letting one cylinder serve several die heights between 110 and 150 mm.
Pallet elevator positioning
Mounted LB-foot under a lift table, the bore 100 cylinder raises about 200 kg of palletized goods vertically with a 2:1 margin at 0.5 MPa plant air.
Weld fixture clamping
In an automotive weld cell the short body tucks inside the fixture frame, and the optional -S magnet with a DMSE switch confirms the clamp is fully extended at 110-150 mm.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40 the Right Cylinder?
Step down to the ACEJ80 (2513.3 N push at 0.5 MPa) if the load is lighter, or step up to the ACEJ125 (6135.9 N) for heavier pressing. Keep in mind the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve where a load must stay put. FA flange, LB foot and I/Y rod knuckles bolt to the ISO 21287 face; order the -S code if CMSE / DMSE sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, so the working range is 110-150 mm. It shortens the stroke only and never lengthens it past the ordered stroke.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. FA flange, LB foot and I/Y rod knuckles bolt to the standard face. The magnet is not fitted as standard: order the optional -S code to enable CMSE / DMSE reed or solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.