Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ100X150-40SB pairs a 100 mm bore with a 150 mm stroke that an external stop screw trims by up to 40 mm, giving a usable range of 110-150 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. Air supply is 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), and rod speed runs 30-500 mm/s.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy presses and clamping stations fit into tight machine frames. Because the push force is 3927 N, plan on roughly 2356 N (about 240 kg) of real work at 0.5 MPa, which corresponds to lifting a part of around 120 kg vertically once a 2:1 margin is applied. The S code means the optional magnet is fitted, so CMSE / DMSE switches can be mounted, and the B code gives a male rod thread with a fixed TPU bumper at each end.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB Is Used
Bale compaction station
The 3927 N push at 0.5 MPa densifies packed goods in a packaging line, and the 110-150 mm adjustable range lets the operator set the final compact height without changing cylinders.
Pallet stamping press
Stamping batch codes into timber pallets needs about 240 kg of usable force, which this 100 mm bore delivers while the short ISO 21287 body slots under a low press head.
Die cart lift-and-lower
Raising a die cart of roughly 120 kg vertically stays inside a 2:1 margin at 0.5 MPa, with CMSE switches on the fitted magnet confirming the lowered and raised positions.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB the Right Cylinder?
At this bore size the step either side is wide: a 63 mm bore delivers 1558.6 N push at 0.5 MPa, while the next size up, 125 mm, reaches 6135.9 N, so pick the 100 mm when your clamp or press needs roughly 3900 N. Remember the stop screw only shortens the extend stroke within the 40 mm window and drifts on air loss, so it is not a mid-stroke lock. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt to the ISO 21287 face, and the fitted magnet lets CMSE / DMSE switches report end positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, so the working range is 110-150 mm. It shortens the stroke only and is a mechanical end stop, not a load-holding brake. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port depends on the 100 mm bore.
The hard-anodized aluminium ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 150 mm stroke cylinder fits where a full-length body would not. FA flange, LB foot and FTC brackets plus I and Y rod knuckles mount straight to the standard face. This model carries the optional -S magnet, so CMSE reed or DMSE solid-state switches can be clipped into the body slots for end-of-stroke sensing; models ordered without -S have no magnet. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the B code gives a male rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-40SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.