Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50
The ACEJ100X150-50 is a double acting AirTAC compact cylinder built to ISO 21287, with a 100 mm bore and a 150 mm stroke that an external stop screw trims by up to 50 mm, giving a usable extend range of 100-150 mm. At 0.5 MPa it pushes with 3927 N and pulls with 3769.9 N, rising to 5497.8 N on push at 0.7 MPa, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body and S45C hard-chrome plated 20 mm rod handle 0.15-1.0 MPa (22-145 psi) of filtered air at 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore fits heavy clamping stations and gantries that cannot spare the space of a full-length profile cylinder. Plan on roughly 2356 N (about 240 kg) of real work at 0.5 MPa rather than the full rating, and expect it to lift about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke impact, FA flange or LB foot mounts bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches if position feedback is added later.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50 Is Used
Heavy fixture clamping
Clamps large weldments or machined housings on a CNC fixture, where the 3927 N push at 0.5 MPa holds the part and the 50 mm trim window lets one cylinder serve several part sizes.
Pallet press and stake station
Drives a press plate or staking head on a packaging line, lifting about 200 kg vertically with a 2:1 margin while the short body keeps the station footprint tight.
Gantry part ejection
Ejects castings or stamped panels from a die on a vertical gantry, with the 100-150 mm adjustable range tuned per die and LB foot mounting on the frame.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50 the Right Cylinder?
Size down to an ACEJ80 (2513.3 N push at 0.5 MPa) when the load is lighter, or step up to an ACEJ125 (6135.9 N push) for the heaviest clamps. For a 100 mm bore at this class, budget about 2356 N of usable push at 0.5 MPa and about 200 kg of vertical lift with a 2:1 margin. The stop screw only shortens the extend stroke within the 50 mm window and does not lock the piston, so do not rely on it to hold a load against air loss. Female M12x1.75 rod thread and 1/4" PT ports suit standard tooling plates; add the -S code if CMSE / DMSE switching will be needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, and the theoretical maximum is 800.9 kgf at 1.0 MPa. The -50 code sets a 50 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, so the usable range is 100-150 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), -20 to +70 C, 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on large-bore clamping stations where space is scarce. FA flange and LB foot mounts bolt to the standard face, and I/Y rod knuckles fit the female M12x1.75 rod thread. Position sensing requires the optional -S magnet at order time; without it no magnet is fitted, so CMSE / DMSE switches cannot be mounted later.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.