Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S
The ACEJ100X150-50S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Its 100 mm bore delivers 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N push at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The -50 code gives a 50 mm adjustment window, so the external stop screw trims the extend stroke anywhere between 100 and 150 mm on site. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted directly in the body slots.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in heavy presses, gantries and guarded cells where every millimetre of envelope counts. A hard-anodized aluminium body with a roller-burnished bore runs against an S45C hard-chrome-plated 20 mm rod, and fixed TPU bumpers absorb end-of-stroke energy. In practice, plan for roughly 2356 N of real work at 0.5 MPa, which lifts about 200 kg vertically with a 2:1 margin - enough to size clamping and lifting fixtures against a known part weight.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S Is Used
Heavy fixture clamping
Clamps large weldments or machining fixtures where 3927 N of push at 0.5 MPa holds the part, and the 100-150 mm adjustable window lets one cylinder serve several fixture heights.
Pallet lift-and-lower stations
Raises roughly 200 kg pallets or die sets vertically with a 2:1 margin, while CMSE switches on the fitted magnet confirm up and down positions to the PLC.
Press and forming cells
Short-stroke pressing, staking or forming on compact frames, where the ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder inside a guarded cell.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S the Right Cylinder?
Size against the load: at 0.5 MPa this 100 mm bore pushes 3927 N, while the next size down, the 80 mm bore, manages 2513.3 N push - step up to this model when your fixture needs that extra margin. If 3927 N is far more than the job needs, the 63 mm bore at 1558.6 N push may be the leaner choice. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost. Mounting options include FA flange and LB foot, with I and Y rod knuckles on the ISO 21287 face; the fitted -S magnet pairs with CMSE / DMSE switches for end-of-stroke signalling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa those figures rise to 5497.8 N push and 5277.9 N pull, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -50 code sets a 50 mm adjustment window: an external stop screw shortens the 150 mm extend stroke by up to 50 mm, giving a usable range of 100-150 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), from -20 to +70 C at 30-500 mm/s, with a 1/4" port and a female M12x1.75 rod thread.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight gantries and guarded machines. Fixed TPU bumpers at both ends absorb end-of-stroke energy. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped into the body slots for position feedback. FA flange and LB foot mountings bolt to the standard ISO 21287 face, and I or Y rod knuckles suit swinging linkages.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.