Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB
The ACEJ100X150-50SB is a double acting ISO 21287 compact cylinder with a 100 mm bore and a 150 mm stroke that an external stop screw trims anywhere in a 50 mm window, giving a usable extend range of 100-150 mm. At 0.5 MPa it pushes with 3927 N and pulls with 3769.9 N, rising to 5497.8 N at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The male rod thread (B code) suits tooling that screws directly onto the rod.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits into tight machine frames. As a rule of thumb, plan for about 2356 N of real work at 0.5 MPa, and for vertical duty the rod lifts roughly 400 kg, or about 200 kg with a 2:1 margin. The hard-anodized aluminium body carries the optional -S magnet, which this model includes, so CMSE / DMSE switches can be mounted in the body slots.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB Is Used
Pallet press station
The 3927 N push at 0.5 MPa clinches cartons or inserts on a palletizing line, with the 100-150 mm adjustable range matching varying product heights.
Heavy fixture lift column
Lifts about 200 kg vertically with a 2:1 margin, ideal for raising welding jigs or die carts in a fabrication shop.
CNC gate actuation
Drives a heavy machine guard or chip conveyor gate at 30-500 mm/s, with CMSE switches confirming open and closed positions.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB the Right Cylinder?
Size against neighbours: a 80 mm bore gives 2513.3 N push at 0.5 MPa, while stepping up to 125 mm raises it to 6135.9 N, so the 100 mm bore at 3927 N sits in the middle for heavy presses and lift stations. If the load must be trimmed on site, the -50 window lets you dial the extend stroke between 100 and 150 mm without swapping the cylinder. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and the stop screw is a mechanical end stop only - it never holds a load if air is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port depends on the 100 mm bore. The stop screw trims the extend stroke by up to 50 mm.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 20 mm rod and a fixed TPU bumper at each end that decelerates the piston at the ends of travel. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder, accepts FA/LB/FTC mountings and I/Y knuckles, and this -S model carries the optional magnet so CMSE / DMSE switches can be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.