Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ100X150-75 pairs a 100 mm bore with a 150 mm stroke and a 75 mm trim window. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. An external stop screw shortens the extend stroke on site anywhere within the ordered 75 mm window, so one cylinder covers a 75-150 mm working range without re-ordering. Air supply is 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 100 mm bore has to fit inside a press frame or machine guard. In practice, plan on roughly 0.6 of the push force, about 2360 N, and treat that as a vertical lift of around 120 kg with a 2:1 margin. The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke energy at both ends, and FA flange or LB foot mounts bolt straight to the ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75 Is Used
Press-frame clamping
The 3927 N push at 0.5 MPa clamps heavy weld fixtures, and the 75 mm window lets one cylinder serve jigs of different part heights.
Pallet lift-and-lower stations
With a practical vertical lift near 120 kg at a 2:1 margin, it raises loaded pallets or dies in packaging lines where a full-length cylinder will not fit.
Gate and chute actuation
Drives heavy sliding gates or diverters on foundry and material-handling lines, with LB foot mounting and 1/4" PT ports for plant air.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75 the Right Cylinder?
At this bore size the step either side is wide: a 63 mm bore delivers 1558.6 N push at 0.5 MPa, while a 125 mm bore reaches 6135.9 N, so choose the 100 mm when your load sits between roughly 1500 and 4000 N. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod will still drift if air is lost. If you need position feedback, order the -S variant to enable CMSE / DMSE switches; this model has no magnet fitted. Female M12x1.75 rod thread and 1/4" PT ports suit standard hydraulic-style fittings and rod attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75 FAQ
Push is 3927 N and pull 3769.9 N at 0.5 MPa; at 0.7 MPa push reaches 5497.8 N, and the theoretical maximum is 800.9 kgf at 1.0 MPa. The bore is 100 mm with a 150 mm stroke, adjustable down to 75 mm via the external stop screw. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the port is 1/4" PT with an M12x1.75 female rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press frames and guards. A fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange and LB foot mounts fit the standard ISO 21287 face. For sensing, order the optional -S magnet code, which allows CMSE or DMSE switches; without -S no magnet is fitted and no switch will read.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.