Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50
This 100 mm bore ACEJ is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 50 mm, giving a usable range of 110-160 mm on site. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa, so it carries heavy clamp and press loads in a body about 50% shorter than an ISO 15552 profile cylinder.
In practice, plan on roughly 2356 N of real work at 0.5 MPa, which is about 240 kg - or lift about 120 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and FA flange or LB foot mounts bolt to the standard ISO 21287 face. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50 Is Used
Heavy press-fit station
The 3927 N push at 0.5 MPa seats bearings or bushings in automotive assembly fixtures, with the stop screw set so the ram bottoms at a repeatable depth between 110 and 160 mm.
Clamping on a machining line
FA flange mounting fixes the cylinder against a CNC fixture wall to clamp cast iron housings; the 50 mm window lets one cylinder serve several part heights.
Pallet lift-and-lower module
Lifts about 120 kg vertically with a 2:1 margin at 0.5 MPa, lowering pallets or fixtures in a packaging cell where the short ISO 21287 body fits under a low gantry.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50 the Right Cylinder?
At this force class, 3927 N push at 0.5 MPa covers heavy clamping and pressing; if your load is lighter, a 63 mm bore (1558.6 N push at 0.5 MPa) saves space, while an 80 mm bore delivers 2513.3 N. Remember the stop screw is a mechanical end stop only - it trims the extend stroke within the 50 mm window but does not hold a load if air is lost. Order the optional -S code if you need CMSE / DMSE switch positions; without it there is no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N; theoretical maximum is 800.9 kgf at 1.0 MPa. The 100 mm bore uses a 20 mm hard-chrome rod with a female M12x1.75 thread and 1/4" PT ports. The -50 stop screw trims the extend stroke anywhere in a 50 mm window, so the working range is 110-160 mm.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guards. A fixed TPU bumper at each end absorbs end-of-stroke shock; it never locks or brakes a load, and the piston drifts if air is lost. FA flange and LB foot mounts fit the standard face, and the optional -S magnet enables CMSE / DMSE switches - without that code no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.