Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB
The ACEJ100X160-75SB is a double acting, adjustable-stroke compact cylinder built to ISO 21287: a 100 mm bore drives a 20 mm hard-chrome-plated S45C rod through a 160 mm stroke, with a 1/4" PT port. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, and the theoretical ceiling is 800.9 kgf at 1.0 MPa. The -75 code means an external stop screw trims the extend stroke anywhere in a 75 mm window, so the usable extend range is 85-160 mm, set on site with a wrench rather than a new order.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 100 mm bore has to fit inside a press fixture or gantry with little headroom. Plan on roughly 2356 N (about 240 kg) of real work at 0.5 MPa instead of the full rating, and for vertical lifts halve the raw figure: this bore lifts about 200 kg vertically with a 2:1 margin. The -S magnet this model carries accepts CMSE / DMSE reed or solid-state switches on the body's magnet slots, and fixed TPU bumpers at both ends absorb end-of-stroke shock.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB Is Used
Press and forming fixtures
With 3927 N push at 0.5 MPa and a trim range of 85-160 mm, this cylinder suits stamping, riveting and crimping heads where the final die position is set on the stop screw rather than fixed at order time.
Pallet lift-and-lower stations
The 100 mm bore lifts about 200 kg vertically with a 2:1 margin, so it raises pallets, tote stacks or die carts on conveyor lift positions; the fitted -S magnet feeds CMSE / DMSE switches for up and down confirmation.
Clamping on machining centres
Fixture clamping of castings or weldments in CNC machining lines, where the short ISO 21287 body fits inside the fixture envelope and LB foot mounting bolts straight to the machine table.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB the Right Cylinder?
Size against the load first: if 3927 N push at 0.5 MPa is far more than the job needs, the 80 mm bore (2513.3 N push at 0.5 MPa) saves space; if the load needs more, the 125 mm bore delivers 6135.9 N at 0.5 MPa. Choose this 100 mm model when the load sits between roughly 2300 and 3900 N at 0.5 MPa and the extend stroke must be trimmed on site within the 75 mm window (85-160 mm usable). The adjuster is a mechanical end stop only - on air loss the piston still drifts, so add a separate valve or lock for load holding. FA flange or LB foot mountings bolt to the ISO 21287 face, the B code gives a male rod thread, and the fitted -S magnet lets CMSE / DMSE switches report end positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N; theoretical maximum is 800.9 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke: the -75 stop screw trims the 160 mm stroke by up to 75 mm, giving a usable range of 85-160 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, port 1/4" PT, rod 20 mm with male thread.
An external stop screw on the cylinder shortens the extend stroke on site by up to 75 mm - it cannot lengthen the stroke past the ordered 160 mm. The stop is a mechanical end position, not a mid-stroke lock, so the piston still drifts if air is lost. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots for end-position sensing. FA flange and LB foot mountings fit the ISO 21287 face, and the hard-anodized aluminium body with fixed TPU bumpers at both ends keeps the unit about 50% shorter in mounting length than an ISO 15552 profile cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X160-75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.