This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE20X110B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE20X110B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP20X110B
The AirTAC Airtac ACP Compact Cylinder ACP20X110B is a double acting DIN-standard tight/compact air cylinder with a Ø20mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE20X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ20 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- StatusDiscontinued → ACE20X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP20X110B
The ACP20X110B is a double acting DIN-standard compact cylinder with a 20 mm bore and a 110 mm stroke, built on a hard-anodized aluminium body with an S45C hard-chrome rod and a fixed TPU bumper at each end. The B code gives a male rod thread, and the air port is M5x0.8. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those rise to 219.9 N and 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. In practice, plan on roughly 94 N of usable push at 0.5 MPa, which corresponds to lifting about 8 kg vertically with a 2:1 margin.
The 110 mm stroke is longer than the 100 mm standard maximum for this bore, so it is a made-to-order build. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits tight jigs and guarding where a full-length body cannot. Note that this model is discontinued: the current-production drop-in is ACE20X110, same bore, stroke and force class, so confirm ISO 21287 mounting dimensions before swapping. The magnet is not fitted here; order the -S code if you need CMSE or DMSE switch sensing.
Airtac ACP Compact Cylinder ACP20X110B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP20X110B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE20X110B |
| Bore size | Ø20 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE20X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
The ACE20X110B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP20X110B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 20 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP20X110B Is Used
Compact jig clamping
Clamps small aluminium brackets in a drilling fixture, using about 94 N of usable push at 0.5 MPa and the short body that fits inside the jig plate.
Packaging line reject pusher
Kicks underweight cartons off a conveyor at up to 500 mm/s, with the 110 mm made-to-order stroke clearing the belt edge.
Lab sample lift
Raises sample trays of about 8 kg vertically in an automated tester, with CMSE switches on the -S magnet option confirming end positions.
Replacing the Airtac ACP Compact Cylinder ACP20X110B with the ACE20X110B
At 20 mm bore you sit between the 16 mm (100.5 N push at 0.5 MPa) and 25 mm (245.4 N push at 0.5 MPa) sizes; pick 16 mm for lighter clamps and 25 mm when the 157.1 N push leaves too little margin. Remember a plain ACP drifts when air is lost, so add a rod lock or pilot check valve for a held load. The 110 mm stroke is non-standard for bore 20 and is built to order. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face family, and the optional -S magnet enables CMSE / DMSE switches. For new projects, specify the ACE20X110 instead.
Replacement checklist
- ✓ Current-production ACE → ACE20X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP20X110B FAQ
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa, 219.9 N push and 164.9 N pull. The theoretical maximum is 32 kgf at 1.0 MPa. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm s, temperature -20 to +70 C.
No. Bore 20 has a 100 mm maximum standard stroke, so 110 mm is a made-to-order build. The ACP20X110B itself is discontinued; the current drop-in is the ACE20X110 (ISO 21287), same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACE20X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE20X110B replacement — usually within 7-8 hours.