This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE20X110S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE20X110S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP20X110S
The AirTAC Airtac ACP Compact Cylinder ACP20X110S is a double acting DIN-standard tight/compact air cylinder with a Ø20mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE20X110S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ20 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- StatusDiscontinued → ACE20X110S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP20X110S
The ACP20X110S is a double acting DIN-standard compact cylinder with a 20 mm bore and a 110 mm stroke, driven by air in both directions and fitted with fixed TPU bumpers at each end. At 0.5 MPa it pushes with 157.1 N and pulls with 117.8 N, rising to 219.9 N and 164.9 N at 0.7 MPa, with a theoretical peak of 32 kgf at 1.0 MPa. The 110 mm stroke is longer than the 100 mm standard limit for this bore, so it is made to order. The -S code means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped onto the hard-anodized aluminium body.
Because the short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, it suits tight jigs and guarding where a full-length body will not fit. For real-world sizing, plan on about 94 N of usable push at 0.5 MPa, which lifts roughly 4.8 kg vertically with a 2:1 margin. Note this model is discontinued: the current-production replacement is ACE20X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP20X110S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP20X110S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE20X110S |
| Bore size | Ø20 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE20X110S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
The ACE20X110S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP20X110S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 20 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP20X110S Is Used
Compact jig clamping
The 157.1 N push at 0.5 MPa clamps small aluminium brackets in drilling fixtures, and the short body fits where a full-length profile cylinder cannot.
Position-checked ejector
With the -S magnet fitted, CMSE or DMSE switches confirm extend and retract on a 110 mm ejection stroke in electronics assembly equipment.
Small parts press station
About 94 N of usable force at 0.5 MPa presses dowels or labels into plastic housings on a benchtop fixture, lifting roughly 4.8 kg vertically with margin.
Replacing the Airtac ACP Compact Cylinder ACP20X110S with the ACE20X110S
If 157.1 N of push at 0.5 MPa is marginal for your load, step up to the 25 mm bore (245.4 N); if the load is light and space is tight, the 16 mm bore delivers 100.5 N. The female M6x1.0 rod thread accepts standard I/Y knuckles, and FA/FB flange, LB foot or CA/CB clevis mounts bolt to the same face. A plain cylinder drifts when air is lost, so add a rod lock or pilot check valve for held loads. Order ACE20X110 as the current drop-in and verify the ISO 21287 footprint.
Replacement checklist
- ✓ Current-production ACE → ACE20X110S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP20X110S FAQ
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa, 219.9 N push and 164.9 N pull; theoretical maximum is 32 kgf at 1.0 MPa. It is a double acting compact cylinder with a 20 mm bore, 110 mm made-to-order stroke, 10 mm rod, M5x0.8 ports, 0.15-1.0 MPa (22-145 psi) operating pressure, 30-500 mm/s speed and fixed TPU bumpers both ends.
Order ACE20X110, the current ISO 21287 successor: swap the P for an E and you get the same bore, stroke and force class in a matching short body. Because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. The ACE family also covers related types such as ASP/ATP, ACPD and ACPJ.
Related AirTAC ACE Cylinders
Request a Quote for the ACE20X110S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE20X110S replacement — usually within 7-8 hours.