This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE25X110SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE25X110SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP25X110SB
The AirTAC Airtac ACP Compact Cylinder ACP25X110SB is a double acting DIN-standard tight/compact air cylinder with a Ø25mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE25X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- StatusDiscontinued → ACE25X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP25X110SB
The ACP25X110SB is a double acting DIN-standard compact cylinder with a 25 mm bore and 110 mm stroke, male rod thread and the optional -S magnet fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the hard-anodized aluminium body. At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa those figures rise to 343.6 N and 288.6 N, with a theoretical maximum of 50.1 kgf at 1.0 MPa.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and guard rails. As a working rule, plan on about 147 N of usable push at 0.5 MPa - roughly 15 kg of vertical lift capacity with a 2:1 margin - instead of the full rating. Note this model is discontinued: the current-production drop-in is the ACE25X110, and you should confirm the ISO 21287 mounting dimensions before swapping. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with fixed TPU bumpers at both ends.
Airtac ACP Compact Cylinder ACP25X110SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP25X110SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE25X110SB |
| Bore size | Ø25 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE25X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
The ACE25X110SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP25X110SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP25X110SB Is Used
Fixture clamping on CNC pallets
The 245.4 N push at 0.5 MPa and 110 mm stroke clear pallet receivers and swing clamps on machining fixtures, with the short body fitting inside the fixture plate footprint.
Position-verified ejector on packaging lines
Because the -S magnet is fitted, a CMSE or DMSE switch confirms full extension before the carton pusher retracts - useful at 30-500 mm/s cycle speeds.
Lane diverter on bottling conveyors
About 15 kg of vertical lift capability with a 2:1 margin handles lightweight gate arms and diverter flaps between conveyor lanes.
Replacing the Airtac ACP Compact Cylinder ACP25X110SB with the ACE25X110SB
For a 110 mm stroke in this force band, the 25 mm bore sits between the 20 mm (157.1 N push at 0.5 MPa) and the 32 mm (402.1 N push at 0.5 MPa) - step up to 32 mm if your load approaches the 147 N usable figure. A plain cylinder of this type drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. The B code gives a male 10 mm rod thread; FA/FB flange, LB foot or CA/CB clevis mounts bolt to the same face. Since the ACP line is discontinued, order the ACE25X110 and verify ISO 21287 dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE25X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP25X110SB FAQ
Push is 245.4 N and pull 206.2 N at 0.5 MPa; at 0.7 MPa push is 343.6 N and pull 288.6 N; theoretical maximum is 50.1 kgf at 1.0 MPa. It is a 25 mm bore, 110 mm stroke, double acting compact cylinder with a 10 mm male rod thread, M5x0.8 port, 0.15-1.0 MPa (22-145 psi) operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C temperature range and 30-500 mm/s speed.
Order the ACE25X110, the current-production ISO 21287 successor: swap the P for an E and you get the same 25 mm bore, 110 mm stroke and force class with a matching short body and mounting family. Because the ACP was built to the DIN standard, confirm the ISO 21287 mounting dimensions against your existing fixture before the swap.
Related AirTAC ACE Cylinders
Request a Quote for the ACE25X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE25X110SB replacement — usually within 7-8 hours.