This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACEJ20X110-10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACEJ20X110-10S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S
The AirTAC Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S is a double acting, adjustable stroke DIN-standard tight/compact air cylinder with a Ø20mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ20X110-10S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ20 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- StatusDiscontinued → ACEJ20X110-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S
This double acting compact cylinder carries the optional -S magnet and a 10 mm adjustable-stroke window, so a stop screw trims the 110 mm extend stroke down to 100 mm on site. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa that rises to 219.9 N. The 110 mm stroke exceeds the 100 mm maximum standard stroke for a 20 mm bore, so it is a made-to-order build.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight pick-and-place gantries and fixture slides. As a rule of thumb, plan for about 94 N of real work at 0.5 MPa, which lifts roughly 8 kg vertically with a 2:1 margin. Note this model is discontinued: the current-production replacement is ACEJ20X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ20X110-10S |
| Bore size | Ø20 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ20X110-10S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
The ACEJ20X110-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 20 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S Is Used
Fixture clamping on CNC jigs
The 157.1 N push at 0.5 MPa clamps small aluminium brackets during drilling, and the 10 mm window lets you trim the stroke to clear the fixture body.
Ejecting parts from assembly dies
With about 8 kg of vertical lift capacity at a 2:1 margin, the 20 mm bore pushes finished bushings out of shallow die pockets at up to 500 mm/s.
Position-checked sorting gates
The fitted -S magnet works with CMSE / DMSE switches to confirm the rod reached the trimmed end position on a 100-110 mm gate stroke.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S with the ACEJ20X110-10S
Size it against neighbours: the 16 mm bore gives 100.5 N push at 0.5 MPa, while stepping up to a larger bore raises force further. The 10 mm window shortens the extend stroke only; it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. FA/FB flange and LB foot mountings bolt to the standard face, and the fitted -S magnet accepts CMSE / DMSE switches. Order ACEJ20X110 as the current drop-in.
Replacement checklist
- ✓ Current-production ACE → ACEJ20X110-10S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ20X110-10S FAQ
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it pushes 219.9 N and pulls 164.9 N. The theoretical maximum is 32 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The -10 code gives a 10 mm window: an external stop screw shortens the 110 mm extend stroke to as little as 100 mm. The model is discontinued; ACEJ20X110 is the current ISO 21287 drop-in in the same bore, stroke and force class - confirm its mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ20X110-10S
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ20X110-10S replacement — usually within 7-8 hours.