Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH
The AirTAC Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø63mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ63 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- ConfigurationStandard compact
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH
The AirTAC ACQ63X100BH is a double-acting, single-rod JIS compact cylinder. A short C-clip and riveted piston-to-rod connection drastically reduces overall axial length compared to round-body units, saving valuable mounting depth. It delivers a substantial 1558.6 N push and 1401.5 N pull force at 0.5 MPa, operating at speeds from 30-500 mm/s.
This specific configuration includes a male M18x1.5 thread on the Ø20 mm piston rod for direct load coupling. The bore is hard-anodized for longevity, and the unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not equipped with a sensor magnet, though the body retains switch grooves for future upgrades.
Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH Technical Specifications
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH Is Used
Injection Mold Ejection
Provides robust 1558.6 N push force to eject dense plastic parts from injection molding dies, utilizing the 100 mm stroke to clear the mold cavity entirely.
Heavy Press Fitment
Drives bearings or bushings into heavy machinery housings on an automated assembly line, where the male M18x1.5 rod end threads securely into the press tooling.
Pallet Flap Folding
Folds large corrugated flaps on heavy-duty palletizing lines, requiring the high pulling force of 1401.5 N at 0.5 MPa to tension and secure thick cardboard.
Is the Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH the Right Cylinder?
When sizing this 63 mm bore actuator, compare its 1558.6 N push at 0.5 MPa against the smaller Ø50 bore (981.8 N) for lighter duties, or step up to the Ø80 bore (2513.2 N) if your application demands greater thrust. Confirm your ordering essentials: 63 mm bore, 100 mm stroke, PT1/4 port, male M18x1.5 rod thread, and no magnet.
Note that a standard ACQ body does not hold its position if air pressure is lost or the directional valve is centered; the rod will drift. The fixed NBR bumper only decelerates the piston near stroke end and acts as neither a lock nor a brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH FAQ
This 63 mm bore cylinder provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The pneumatic port size is PT1/4.
No. It uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not a field-adjustable air cushion. Additionally, this specific model ships without a sensor magnet, though the body retains grooves for adding AirTAC reed or electronic switches if retrofitted later.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ63X100BH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.