verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke140 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$82.31 $89.81Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20

The AirTAC SAIJ32X140-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 120 to 140 mm, allowing you to dial back the nominal 140 mm stroke by up to 20 mm during commissioning without swapping components.

This variant uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and accepts PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It utilizes a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20 Is Used

tune

Variable End-Stop Positioning

Dial in the exact retract distance between 120 and 140 mm for delicate pick-and-place operations that require frequent adjustments to meet varying package sizes.

settings_input_component

Machine Changeover Setup

Quickly reconfigure the cylinder's effective travel window during product line changeovers without disassembling the mounting hardware or installing physical spacers.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20 the Right Cylinder?

The 20 mm rear adjuster screw lets you set a precise retract stop for product changeovers, avoiding the need to bolt on external stops or buy a fixed-stroke SAI cylinder. If your setup requires less force, stepping down to a 25 mm bore might work, but the 32 mm offers a better margin for friction. If you need significantly more thrust, stepping up to a 40 mm bore yields 628 N at the same pressure.

Because the stroke is 140 mm, side-load risks are moderate, but always guide the load properly for long unsupported travels. Remember that the rear adjuster is a travel stop, not a lock; this SAIJ will not hold its load without live air pressure. For true pneumatic locking without pressure, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 32 mm bore, 140 mm stroke, PT port, and desired mounting bracket.

AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20 FAQ

It features a rear adjusting screw that allows you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 120 to 140 mm, letting you fine-tune the end position at commissioning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32AX140-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.