
The AirTAC SAI32 Standard Cylinder SAI32X25 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X25 is a double-acting ISO 15552 profile cylinder engineered for compact pneumatic automation. Delivering a push force of 402 N at 0.5 MPa, this 32mm bore unit is tailored for short-stroke clamping and ejecting tasks. Its extruded aluminum barrel omits tie rods, presenting a clean profile that drops directly into standardized ISO 15552 mounting interfaces.
This specific configuration features a standard carbon steel piston rod and PT tapered port threads. It lacks a built-in magnet, but the barrel retains dual-sided sensor grooves ready for future CMSE or DMSE switches if sensing requirements evolve. For operations needing heat resistance, the standard TPU seals can be swapped for Viton (H) alternatives.
| Model | Airtac SAI32 Standard Cylinder SAI32X25 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pushing machined components out of a fixture with a quick 25mm stroke and 402N of force at 0.5 MPa.
Provides secure holding pressure for small workpieces during secondary light machining or inspection processes.
Actuates small pneumatic gates or diverters on packaging lines where a compact 32mm footprint is required.
Select this 32mm bore when your application demands a short 25mm stroke and moderate force, stepping down from a 40mm bore (628 N at 0.5 MPa) to save valuable machine space. If your cycle requires position holding without continuous air pressure, remember that standard cylinders drift under load; integrate an external rod lock or specify the SAIL locking variant for secure mid-stroke retention.
Because the stroke is only 25mm, rod-bearing bending from side loads is negligible. However, for any tasks involving offset loads, always utilize standard ISO mounting accessories like an FA flange or LB foot bracket to maintain alignment and prevent premature seal wear.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa operating pressure, the SAI32X25 provides a push force of 402 N and a pull force of 345 N. At its maximum 1.0 MPa pressure, the theoretical push force reaches 724 N.
Yes, as a genuine ISO 15552 profile cylinder, its mounting dimensions are standardized. It serves as a direct replacement for other ISO 15552 cylinders, matching standard foot and flange patterns without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.