Airtac SAI32 Standard Cylinder SAI32X200
The AirTAC SAI32 Standard Cylinder SAI32X200 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI32 Standard Cylinder SAI32X200
The AirTAC SAI32X200 is a double-acting ISO 15552 profile cylinder engineered to deliver 402 N of push force at 0.5 MPa. Its 200 mm stroke makes it well-suited for compact automation tasks requiring moderate travel. The extruded aluminum barrel eliminates tie-rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
For demanding environments, you can configure this unit with high-temperature Viton (H) seals instead of the standard TPU. Because this specific configuration lacks a magnet, it does not support direct sensor switching; add the -S option if you require CMSE or DMSE position detection.
Airtac SAI32 Standard Cylinder SAI32X200 Technical Specifications
| Model | Airtac SAI32 Standard Cylinder SAI32X200 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI32 Standard Cylinder SAI32X200
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI32 Standard Cylinder SAI32X200 Is Used
Component Ejection
Pushes machined parts out of a fixture with 402 N of force at 0.5 MPa, utilizing the 200 mm stroke to clear the work area completely.
Package Diverting
Actuates a routing gate on a 32 mm profile cylinder interface, providing reliable pneumatic switching for lightweight logistics routing.
Clamp Actuation
Drives small pneumatic clamps on welding fixtures, where the carbon steel rod provides durable performance under repetitive cycling.
Is the Airtac SAI32 Standard Cylinder SAI32X200 the Right Cylinder?
Choose this 32 mm bore when your application requires less force than the 40 mm version (which provides 628 N at 0.5 MPa) but more than smaller compact cylinders. The 200 mm stroke is standard, but its length means you must account for rod-bearing bending under side loads; use an external guide rail or a guided cylinder to prevent premature seal wear if the load is not perfectly axial.
This model uses PT tapered port threads and accepts standard FA, FB, or TC mounting accessories. If the machinery loses air pressure, this cylinder cannot hold its load in place and will drift; select the SAIL variant if your application requires a mechanical lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI32 Standard Cylinder SAI32X200 FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. It can reach up to 724 N at 0.9 MPa.
Yes. The SAI32X200 is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting interface and hole pattern as other standard profile cylinders in this bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI32 Standard Cylinder SAI32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.