
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability eliminates the need to swap cylinders or bolt on external stops when dialing in end positions.
This SKU is configured with an SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and includes a magnet (-S) for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic solid-state switches. It uses a PT G1/8 port and offers variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 120-140 mm travel window during product size changeovers on a packaging line without replacing the actuator.
Fine-tune the retract end-stop during initial commissioning to perfect the seating of light components without adding external stops.
Leverage the -S magnet with DMSE electronic sensors to confirm part ejection positions within the adjustable travel range.
The adjustable-stroke design is ideal for machine changeovers or product-size variations, allowing you to set the exact end-stop without replacing the actuator. Remember that the rear adjuster functions strictly as a travel stop, not a lock; the cylinder cannot hold a load without live air, so consider an AirTAC SAIL or BSAI for fail-safe load holding.
To match this exact configuration for an ISO 15552 replacement, specify the 32 mm bore, 140 mm stroke, 20 mm adjustment range, PT G1/8 port, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. The 12 mm rod and M10x1.25 thread handle moderate side loads well, but for this 140 mm stroke, always ensure proper external guiding to prevent rod binding.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop that allows you to shorten the 140 mm nominal stroke by up to 20 mm, creating a 120-140 mm usable travel window. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.