
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 100-140mm usable travel window from its 140mm nominal stroke. This bore size features a 12mm rod and M10x1.25 thread, operating at speeds from 30-800 mm/s.
The external rear stopper lets you dial in the exact end position during commissioning without swapping hardware. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and rear pivot styles.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 100-140mm travel window during initial commissioning to perfectly dial in the end-of-stroke position without adding external stops.
Quickly trim up to 40mm of stroke when switching product sizes on a packaging line, keeping changeover times low.
The 40mm adjustment range is ideal for product changeovers on a line, letting operators trim travel back by up to 40mm without bolting on external stops. For fixed travel without commissioning adjustments, a standard SAI cylinder is sufficient.
The rear adjuster acts only as a travel stop and cannot hold a load without live air pressure. For pneumatic load-holding, consider an AirTAC SAIL or BSAI clamp-lock cylinder. This SAIJ32X140-40 uses PT tapered port threads and is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
The SAIJ32X140-40 has a nominal 140mm stroke with a rear adjuster that allows you to shorten the effective travel by up to 40mm. This creates a 100-140mm usable travel window for fine-tuning the end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.