
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 100 to 140 mm.
This -S variant includes a magnet for position sensing with AirTAC CMSE reed and DMSE solid-state switches. The extruded aluminum barrel includes sensor grooves on both sides, and the rear stopper allows you to fine-tune end positions at commissioning without adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 100 to 140 mm end-position during commissioning to perfect part ejection without swapping out physical spacers.
Quickly adapt the cylinder travel for new product sizes on a conveyor line by adjusting the rear stopper up to 40 mm.
Fine-tune the retract stroke on automated fixtures to accommodate varying material thicknesses without external hard stops.
An adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, whereas a fixed-stroke SAI cylinder is better for rigid, repetitive motions.
Because the stroke is 140 mm, side-load risks are moderate, but always ensure proper guidance for unsupported loads. To replace this ISO 15552 cylinder, match the 32 mm bore, 140 mm stroke, 40 mm adjustment, PT G1/8 port, and -S magnet. Note that the rear adjuster is a travel stop, not a lock; for load-holding without live air, use an external rod lock or an AirTAC SAIL cylinder.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you shorten the nominal 140 mm stroke by up to 40 mm, creating a 100 to 140 mm usable travel window. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.