
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 140 mm travel back by up to 50 mm, creating a usable window of 90-140 mm.
This unit uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and while this configuration omits the magnet, the grooves remain ready for future sensor additions. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 90 to 140 mm travel needed when switching between product sizes on a packaging line, using the rear screw to fine-tune the retract position instantly.
Perfect the end-of-stroke contact point during initial commissioning without machining custom external stopper blocks, ensuring precise component placement.
Choose this 32 mm bore model when your application requires precise end-position tuning during commissioning or product changeover, avoiding the need to swap cylinders or bolt on external stops. If your setup needs less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N at 0.5 MPa for heavier payloads. Conversely, if your force requirements exceed 724 N, consider the larger 50 mm bore.
For load-holding without continuous air pressure, this cylinder is not a lock; the rear adjuster only sets the travel end. You would need an external rod lock or a related type like the SAIL (air-released lock) or BSAI (clamp-lock). As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints using the Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessory set, omitting FB, CA, CB, and CR brackets.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you shorten the 140 mm nominal stroke by up to 50 mm, providing an effective travel range of 90 to 140 mm. It acts as a mechanical stop to set the retract end position and does not lock the load without live air pressure.
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.