
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly flexible 65-140 mm usable stroke window, letting you dial in the exact end position at commissioning without swapping out the barrel or adding bulky external stops.
This variant uses a SUS420J2 stainless steel rod for improved corrosion resistance and features PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for mounting position switches. Note that the rear adjuster acts purely as a travel stop for the retract end and does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stop within the 65-140 mm window to perfectly strike packages of varying widths without re-mounting hardware.
Rapidly adjust the stroke length during product family transitions by turning the rear stopper screw instead of swapping cylinders.
Choose this 32 mm bore when your application requires a maximum thrust of 402 N at 0.5 MPa; if you need greater force, stepping up to the 40 mm bore yields 628 N. The 75 mm adjustment range is ideal for machines that process multiple product sizes, allowing rapid changeover by simply turning the rear screw rather than replacing the entire cylinder with a fixed-stroke SAI unit. Because the plain SAIJ lacks a locking mechanism, you must maintain live air pressure to hold a load in place—use an AirTAC SAIL or BSAI cylinder if the application requires fail-safe load holding.
For ISO 15552 replacement matching, ensure your setup accommodates a 32 mm bore, 140 mm nominal stroke, 75 mm adjustment range, PT port threads, and no magnet (-S). Since the stroke here is under 300 mm, side-load stress on the 12 mm rod is manageable without an external guide, though long unsupported strokes still require careful alignment.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke by up to 75 mm, giving you a usable travel window of 65 to 140 mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.