
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers 402 Newtons of pull force at 0.5 MPa and provides a usable travel window of 65 to 140 mm, allowing you to trim the effective stroke by up to 75 mm during commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback.
This model uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance compared to standard carbon steel. The G1/8 port and 27 mm cushion length ensure controlled deceleration at both ends. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding without continuous air, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 65 to 140 mm travel window during product size transitions to set new end positions rapidly without changing the cylinder.
Use the rear adjusting screw to fine-tune the retract position at commissioning, eliminating the need to bolt on external mechanical stops.
Leverage the 402N pull force and SUS420J2 rod for compact, corrosion-resistant positioning in light assembly automation.
Choose this 32 mm bore adjustable cylinder when your machine setup requires variable end-stops or frequent product-size changeovers, stepping down from a 40 mm bore that provides 528N of pull force at 0.5 MPa. The SAIJ32X140-75-S is dimensionally interchangeable per ISO 15552 and is configured with a PT tapered port, SUS420J2 stainless steel rod, and a magnet for CMSE/DMSE sensors. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the 140 mm stroke is below the 300 mm side-load threshold, external guiding is less critical than on longer strokes, but the 12 mm rod still requires standard alignment care.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 Newtons of push force and 345 Newtons of pull force.
The rear adjuster screw allows you to shorten the 140 mm nominal stroke by up to 75 mm, creating a usable travel window of 65 to 140 mm. The adjuster functions as a mechanical stop for end-position tuning and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.