
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX145-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X145-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 10 mm. This creates a precise 135-145 mm usable stroke window, enabling fine end-position tuning at commissioning without swapping out the cylinder or adding bulky external stops.
The rear adjustment mechanism acts purely as a travel stop to set the retract end-position and is not a lock, meaning the cylinder cannot hold a load without live air pressure. For load-holding requirements, SAIL or BSAI series cylinders are required. This 32 mm bore unit operates at 30-800 mm/s and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX145-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 135-145 mm retract position during initial machine commissioning without machining new spacer blocks.
Quickly trim the stroke back by up to 10 mm on the production line when switching to a slightly shorter workpiece.
Use the rear stopper screw to fine-tune the resting position of a small clamping or pushing mechanism within a 10 mm window.
The adjustable stroke is ideal for dialing in exact retract distances on the fly, whereas a fixed SAI cylinder requires shims or manual modifications to alter the end position. When replacing an ISO 15552 cylinder, match the 32 mm bore, 145 mm stroke, 10 mm adjustment, PT ports, and the specific mounting accessory.
Because the 145 mm stroke is relatively short, side-loading risks are minimal, but you should still ensure the load is properly guided to prevent rod binding. Note that this configuration omits a magnet, so position sensing via CMSE or DMSE switches is not possible without upgrading to an -S variant.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
It features an external adjusting screw at the rear that allows you to shorten the nominal 145 mm stroke by up to 10 mm, providing a usable travel window of 135-145 mm. The adjuster acts as a mechanical stop to set the end position and is not a lock, so it will not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.