
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX145-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X145-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a substantial 100 mm adjustment range, allowing you to dial the effective travel down from the 145 mm nominal stroke to as little as 45 mm.
This unit is configured with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and features PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Because the rear adjuster acts strictly as a travel stop and the air cushions manage end-of-stroke deceleration, this cylinder cannot hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX145-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 45 to 145 mm during product size changeovers without physically replacing the cylinder or adding external mechanical stops.
Adjust the retract position on the fly to accommodate different package sizes on a conveyor line, using the rear screw to set the exact travel limit.
The 100 mm adjuster lets you trim the 145 mm stroke back to a 45 mm window, which is ideal for product changeovers on a packaging line without swapping the cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 145 mm stroke, 100 mm adjustment, PT G1/8 port, and the desired mounting accessory. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). For load-holding without continuous air pressure, select a SAIL or BSAI series instead of relying on the adjuster. Since this model lacks a magnet, position sensing requires adding a separate piston magnet or choosing an -S variant to use CMSE reed or DMSE electronic sensors.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 145 mm down to a minimum of 45 mm. This creates a 100 mm adjustable window for fine-tuning the end position at commissioning, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.