
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX155-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 155 mm stroke with an adjustable travel window of 115 to 155 mm, allowing you to dial back the extend position by up to 40 mm during commissioning without adding external stops.
This variant uses a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and because no magnet is specified, it operates without position sensing. The rear adjuster acts purely as a travel stop to fine-tune the end position, while the standard PT G1/8 porting handles airflow for speeds up to 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the extend end-position by up to 40 mm when switching product sizes on a packaging line, eliminating the need to physically swap cylinders.
Dial in the exact 115-155 mm travel window during initial commissioning to perfect the pressing or positioning force without machining custom external spacers.
Choose this 32 mm bore adjustable cylinder when your application requires precise end-position tuning at machine setup or product changeover, rather than relying on a fixed-stroke SAI cylinder. The rear screw stopper sets the travel end but does not lock the load; for position holding without live air pressure, consider an AirTAC SAIL or BSAI series cylinder.
As a dimensionally interchangeable ISO 15552 profile cylinder, this model uses PT G1/8 port threads and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the 155 mm stroke is under 300 mm, side-load concerns are minimal, though long unsupported loads should still use an external guide.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke from 155 mm down to 115 mm. This creates a 40 mm tuning window to set the exact retract end-position at commissioning without changing the cylinder mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.